offsetting mulcher
48-95 HP*

No matter what the situation:
a strong mulcher in any position.

SMO avs is a very strong offsetting mower. It mulches grass and brush up to 7 cm [2.8"] in diameter. Hydraulic angling and hydraulic side shift make it possible to work in many different positions and situations. It is thus suitable for the maintenance of greenspace such as slopes, road sides, or of steep orchards and vineyards. As on all the SEPPI flail mowers, it is possible to adjust the height of cut and the degree of mulching.

The offsetting mulcher SMO avs can be hydraulically angled from +90° to -50°, indepentently from the side shift. Maximum side shift is 180 cm [71"]. With maximum side shift the mulcher can reach up to 355 cm [132"] to the right of the tractor center line, depending on the working width.

STANDARD VERSIONS

mulches grass and bushes up to 7 cm [2.8"] Ø
working speed 1-5 km/h
cat. 2 ISO 3-point linkage
hyd. positioning from +90° to -50°
hyd. side shift to the right
540 rpm gearbox with cross shaft
input shaft 1 3/8" Z=6
number belts
up to L=200: 4
from L=225: 5
adjustable rear hood
front protection: metal flaps (OPT 181) or chains (OPT 025)
rear protection: rubber flap
support roller adjustable in height 5 cm [2"]
anti-shock device
necessary hyd. fittings: 2 double acting
standard flails
up to L=200: SMO
from L=225: SMW

OPTIONS

PTO shaft with freewheel
rotor with 3 Y knives
lateral support rollers Ø 160 mm [6"]
additional rubber front protection
chevrons for working and for transportation on public roads

• the indicated HP refer to the input power required by the input shaft of the prime mover